Sika 215 Wood & GRP Primer 250ml SP215
Our Price:
£77.02 inc VAT / £64.19 ex VAT
Home / Shop / Silicone and Sealant / Sealant Primers and Cleaners /
Sika 215 Wood & GRP Primer 250ml
Product Code: SP215
Barcode: 7612894884968
Sika Primer 215 is suitable for application to the following substrates:
plastics such as GRP, epoxy resins, PVC, ABS, various non-metallic substrates, FRP, plywood, timber and wooden fixtures.
Because plastics vary so much in their chemical composition, preliminary trials are necessary.
This product must not be used on plastics that are prone to stress cracking such as acrylics or polycarbonates.
This product is suitable for experienced professional users only.
Tests with actual substrates and conditions have to be performed to ensure adhesion and material compatibility.
Method of Application:
Apply a thin but covering coat of Sika Primer-215 with a brush or dauber.
Do not apply at temperatures below 50 deg F or above 95 deg F.
For application at lower or higher temperatures, consult with Sika Technical Service.
Allow primer to dry for a minimum of 30 minutes at 73 deg F and 50% relative humidity.
Ambient temperature and substrate porosity affects drying time.
Surface should be tack-free before Sikaflex application.
For best results, apply Sikaflex within two hours after priming.
Avoid re-priming Sika Primer-215 should be applied once only.
Care must be taken to ensure that this single application gives adequately dense coverage.
Reseal container tightly immediately after use.
Additional information
| Weight | 1.11 kg |
|---|---|
| Reference Code | SA-SP215 |
Only logged in customers who have purchased this product may leave a review.
© Sealants 2026. All Rights Reserved
Sealants is a registered company in England.
Reviews
There are no reviews yet.